For ten years, Lispring has been focusing on the R&D and production of wave springs and spiral retaining rings in the past, present and future, aiming to provide reliable and satisfactory products to global high-tech customers. We welcome your inquiries at any time.
Standard stainless steel versions operate reliably at up to 600°C.
Nickel-based alloy versions withstand temperatures exceeding 1000°C (e.g., gas seals in jet engines).
Compared to rubber/plastic seals (which are prone to melting and aging), metal laminar rings offer 3–5 times longer lifespan.
Treated with solution phosphating (gold-colored coating), improving wear resistance by 50% despite a 20% reduction in hardness.
Optional Hastelloy or titanium materials available for severe corrosion environments (e.g., chemical pipelines).
The multi-tooth labyrinth structure utilizes both throttling and jet contraction effects for dual leakage prevention.
Supports line speeds up to 10 m/s (e.g., in high-speed roller bearings).
Reduces frictional contact area by 70%, significantly lowering energy consumption and heat generation.
| Industry | Typical Equipment | Problem Solved |
|---|---|---|
| Metallurgical Machinery | Continuous caster roller bearings | Reduces grease consumption by 30%, extends replacement cycles |
| Energy & Power | Gas turbine exhaust systems | Prevents efficiency loss due to high-temperature gas leakage |
| Petrochemical | Reactor rotating shaft seals | Resists corrosion from acidic/alkaline media |
| Automotive | Turbocharger bearing housings | Withstands 800°C exhaust impact |
3–5 concentric teeth form a Z-shaped flow path, reducing pressure by 15–20% with each gap.
Testing shows: leakage at 10 bar is only 1/8 that of traditional oil seals.
Patented guide chuck design improves installation efficiency by 40%, ensuring even gap spacing (±0.05 mm tolerance).
Chamfered structure prevents scratching the sealing surface, achieving a 99.2% installation success rate.
Temperature Threshold: Use nickel-based alloys for applications over 400°C.
Media Characteristics: Use Hastelloy C276 in acidic environments.
Rotational Speed: For speeds over 5000 rpm, opt for reinforced locking structures.
Inspect gear tooth wear every 500 hours (max allowable dent depth: 0.1 mm).
Use specialized cleaners to remove carbon deposits during downtime (do not use wire brushes).
