For ten years, Lispring has been focusing on the R&D and production of wave springs and spiral retaining rings in the past, present and future, aiming to provide reliable and satisfactory products to global high-tech customers. We welcome your inquiries at any time.
The installation method of the spiral retaining ring is as follows: pry one end of the retaining ring with your hand, insert it into the groove,
surround the circumference of the groove, press down and wind the retaining ring until it is completely wrapped around the groove. The removal
method of the retaining ring and the tool elastic retaining ring have standard removable grooves, which are easy to remove from the groove.
The removable groove forms a small gap between the end of the retaining ring and the shaft or hole, allowing a blunt object to be inserted into
the end of the retaining ring and pry up the free end of the retaining ring radially upward. Insert a screwdriver or a dental forceps behind the
removable groove, use a tool to pry up the front end of the end of the retaining ring, and rotate the circumference of the retaining ring by hand until it is released from the groove.
