For ten years, Lispring has been focusing on the R&D and production of wave springs and spiral retaining rings in the past, present and future, aiming to provide reliable and satisfactory products to global high-tech customers. We welcome your inquiries at any time.
The force-rise spiral retaining ring is different from traditional stamped retainer rings. The force-rise spiral retaining ring adopts a winding manufacturing process for precise diameter requirements. They have a uniform cross-section (anti-interference) and no burrs. The force-rise spiral retaining rings meets the specifications of the military and aerospace industries and is used in thousands of mechanical products worldwide. Common card-type retainer rings have ears on the structure, causing interference with internal parts. The force-rise spiral retaining rings made of stainless steel has a consistent cross-section without ears, so it will not interfere with the mating parts after installation, and the cost of the snap ring is lower than that of the card-type retainer ring. The use of spiral retaining rings can save the design of the shaft table, reduce the size of the shaft, save materials and processing time. The force-rise wave retainer ring is a detachable retainer ring with a wave shape. A wave retainer ring can replace a retainer ring and a wave spring, which can pre-apply pressure to the ball bearing, and also assemble in the groove like ordinary force-rise retainer rings. The double-ring offset outer retainer ring is used to replace the shaft table. It is used to secure nozzle parts for easy assembly. The width of the retainer ring is designed to have zero interference, and its outer diameter is smaller than the diameter of the thread root. In pressure gauges, the wave retainer ring is installed in a shallow groove, causing only a very small pressure on the surface glass. In this way, the retainer ring can both secure the surface glass without crushing it. The retainer ring forms sidewalls on both sides of the synchronous pulley. This method eliminates the need for pressing in sidewalls. To facilitate belt replacement, one side of the retainer ring is designed to be easily removable. The wave retainer ring is easy to meet on-site maintenance requirements. If the hydraulic cylinder seal ring needs maintenance, the retainer ring can be quickly removed with a screwdriver and easily reinstalled. There are many uses for elastic retainer rings, such as contacting me with our company for more information. In addition, the use of wave springs is also widely used, such as for use in adjustable pulleys, bearing pre-pressing, electrical connections, hydraulic seals, clutches, ball valves, fluid valve couplings, etc.
Characteristics of Lisheng elastic retainer ring: 1. The non-lug design of the Lisheng retainer ring ensures that the retainer ring and accessories do not interfere with each other;
1.The force-up retainer ring is formed by crystal winding, which has more stable mechanical properties compared to traditional stamping processes;
2.360° flat surface, stable size;
3.More than 5,000 standard retaining rings (diameter 6.5~406mm);
4.Special customized non-standard retainer rings do not require mold costs (diameter 5~2300mm);
5.Easy to install and disassemble.
